iCON robot 60/iCON builder 60, Safety Directions
15
Labelling
1.6.6
Electronic Guide Light EGL
General
The Electronic Guide Light built into the product produces a visible LED beam which
emerges from the front side of the telescope.
1.6.7
Laser Plummet
General
The laser plummet built into the product produces a visible red laser beam which
emerges from the bottom of the product.
The laser product described in this section is classified as laser class 2 in accordance
with:
• IEC 60825-1 (2007-03): "Safety of laser products"
• EN 60825-1 (2007-10): "Safety of laser products"
These products are safe for momentary exposures but can be hazardous for deliberate
staring into the beam. The beam may cause dazzle, flash-blindness and after-images,
particularly under low ambient light conditions.
Pulse repetition frequency (PRF)
24.4 kHz
Beam divergance
0.4 mrad x 700 mrad
Description
Value
Class 1 Laser Product
according to IEC 60825-1
(2007 - 03)
a) Laser beam
Complies with FDA performance standards for laser products
expect for deviations pursant to Laser Notice No. 50, dated
June 24, 2007
This device complies with part 15 of the FCC Rules. Operation
Is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Equip.No.: 1234567
Power: 12V / 7,4V ,1A max.
Leica Geosystems AG
CH-9435 Heerbrugg
Manufactured: 20XX
Made in Origin
Type:
iCR6X
Art.No.:
7900XX
S.No.:
123456
a
006275_001
The product described in this section, is excluded from the scope of IEC 60825-
1 (2007-03): "Safety of laser products".
The product described in this section, is classified as exempt group in accord-
ance with IEC 62471 (2006-07) and does not pose any hazard provided that
the product is used and maintained in accordance with this user manual.
a) LED beam red
b) LED beam yellow
a
b
TS_099
