background image

Leica DM750 P User Manual 

Safety Regulations 8

Important Notes

Description

The Leica DM750 P microscope meets today's 
state of the art of technology. Nevertheless, 
hazards may still arise during operation. The 
potential risks are described below.

 

Before installing, operating or using the 
instrument, it is mandatory to read this 

user manual. In particular, please observe all 
safety instructions.

User manual

This user manual includes important instruc-
tions related to operating safety, maintenance 
and accessories.

 

Your Leica DM750 P microscope comes 
with an interactive CD-ROM with all 

relevant user manuals. Keep it in a safe place, 
and readily accessible to the user. User manu-
als and updates are also available for you 
to download and print from our website at 
www.leica-microsystems.com.

Accessories from third-party suppliers

You can combine individual system articles with 
articles from external suppliers. Please read the 
user manual and the safety requirements of the 
supplier.

Original condition

To maintain the unit in its original condition 
and to ensure safe operation, the user must 
follow the instructions and warnings contained 
in these user manuals.

Legal requirements

Adhere to general and local regulations relat-
ing to accident prevention and environmental 
protection. 

EC Declaration of Conformity

Electrically operated accessories are 
constructed based on the state of the art of 
technology and are provided with an EC Decla-
ration of Conformity.

Содержание DM750 P














































Отзывы: