Leica DM IRB, Инструкция по эксплуатации

Страница: 68 / 130

68
Fig. 59 HCI 3T22, trinocular tube with 45
°
viewing angle
Light path: 100 % vis – switch rod
1 50 % – 50 % – switch rod
100 % – photo – switch rod
Field of view no. up to 22, eyepiece diameter 30 mm for
HC PLAN 10x/20 or 22 eyepieces, interpupillary distance set-
ting: 55 – 75 mm
1 Clamp screw, 2 Tube port, 3 Siedentopf binocular part,
4 Photo/TV port, 5 Switch rod
Fig. 58
HCI BV22, ergo binocular tube with 15
°
– 50
°
viewing angle,
field of view no. up to 22, eyepiece diameter 30 mm for
HC PLAN 10x/20 or 22 eyepieces, interpupillary distance set-
ting: 55 – 75 mm
1 Clamp screw, 2 Tube port, 3 Siedentopf binocular part
1
5
2
4
3
To correct defective eyesight:
●
Look through the right-hand eyepiece tube
with your right eye and sharply focus the
specimen with the fine drive.
●
Then look at the same area of the specimen
with your left eye and rotate the left eyepiece
tube until you obtain a sharp image. Do not
use the fine drive for this.
●
If using eyepieces with adjustable eyelenses,
do not compensate for defective eyesight by
adjusting the eyepiece tube, but by adjusting
the eyelens of the eyepiece.
Trinocular tube HCI 3T22
●
Set the beamsplitter at visual observation by
pushing in the switch rod. The switching
positions are indicated by symbols on the
side of the tube.
100␣ % vis – switch rod
1 50␣ % – 50␣ % – switch rod
100␣ %␣ –␣ photo – switch rod
●
The eyepieces are set in exactly the same
way as on the binocular tube.
●
Compensate defective eyesight by adjusting
the eyelens of the eyepiece.
1
3
2