Basic device Applications
Straight line single distance measurement
Basic usage is quite simple.
To begin, press the
key once to switch the laser on and aim at
your target.
Pressing
again records the measurement and shows the result
on the device display.
* For measurements, where there is nothing obvious at the other end for the laser to reflect back, it is
recommended that you use Leica branded Target plate for maximum measurement range.
Permanent / Minimum-Maximum measurement
This function determines the minimum or maximum distance from a specific measuring
point, e.g. the determination of room diagonals (maximum value) or horizontal distance
(minimum value).
To activate permanent measuring, press and hold the
key for 2
seconds. This will activate the continuous laser.
Aim the laser at wall corners (maximum value) or horizontal distance
(minimum value). The display would show the max. & min. values on
the screen.
To stop permanent/minimum-maximum measuring press
key
once.
Add/ Subtract function
Add / Subtract are two basic functions in D410. The keys are
displayed on the device for this application.
Press
once to add the next measurement to previous one.
Press
twice to subtract the next measurement to previous one.
Point finder/View screen
Press the
key on the device to activate the camera mode.
With the help of navigation keys zoom the pointfinder to
1x, 2x
&
4x
zoom.
*
You can also adjust the illumination by using
keys.
