background image

Increase the separation between the equipment 
and receiver.

Connect the equipment into an outlet on a circuit 
different from that to which the receiver is 
connected.

Consult the dealer or an experienced radio/TV 
technician for help

WARNING:

Changes or modifications not expressly 

approved by Leica Geosystems for compliance could 
void the user’s authority to operate the equipment.

Laser classification

The Leica DISTO™ produces a visible laser beam 
which emerges from the front of the instrument. 

The product is a Class 2 Laser Product in accordance 
with:

IEC60825-1 : 2007 "Radiation safety of laser 
products"

Class 2 Laser Products:

Do not stare into the beam or direct it unnecessarily 
at other persons. Eye protection is normally afforded 
by aversion responses including the blink reflex.

WARNING

Looking directly into the laser beam with optical 

aids (e.g. binoculars, telescopes) can be hazardous.

Precautions:

Do not look directly into the beam with optical aids.

CAUTION:

Looking into the laser beam may be hazardous 

to the eyes.

Precautions:

Do not stare into beam. Do not look into the laser 
beam. Make sure the laser is aimed above or below 
eye level (particularly with fixed installations, in 
machines, etc.).

Содержание DISTO D210XT
















Отзывы: