manualshive.com logo in svg

Leica Geosystems MX9400N, Руководство пользователя

Поделиться
Скачать
Leica Geosystems MX9400N Скачать руководство пользователя страница 5

 

WinFrog User’s Guide - Appendix C – GPS/MX 9400 

Page 5 of 

22

 

As mentioned previously, in order for WinFrog to communicate with the MX9400 
using only one of the MX9400’s four ports, WinFrog reassigns the data output to port 
1 of the MX9400, as seen below. 
 

 

 
This configuration has assigned PC Control input, Raw data Output, and NMEA 
output to port 1. Differential correction data (RTCM) is still assigned to port 3 - this is 
to where you would connect the DGPS receiver. 
The configuration above has also defined the output of NMEA format $GPGGA 
positional data, and raw Pseudorange/Ephemeris/Time data required for WinFrog’s 
Multi-Ref positioning. This configuration is typical of that used in most WinFrog 
operations. If you are only using the MX9400’s internally calculated position, you 
need only select a Position ($GPGGA or $GPGLL) item. 

 
Once this dialog box is correctly configured, click the 

OK

 button. WinFrog sends the 

configuration commands to the MX9400, and closes the dialog. To reconfigure any one 
of these options, select the MX9400 device in the I/O Devices dialog box, then right 
click and select Edit I/O. Click OK to close the standard Edit I/O dialog box, at which 
point the 

Configure MX Serial Ports

 dialog box appears. 

 
 

WINFROG I/O DEVICES > CONFIGURE DEVICE: 

This device must be configured at the I/O Device window level. In the I/O Devices 
window, click the device name to select it, then right-click and select Configure Device.  
The MX9400 Configuration dialog box appears, as seen below.  
 

Содержание MX9400N























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды