Leica Geosystems BLK3D Скачать руководство пользователя страница 55

Страница: 55 / 70

Technical Data

18.1

Conformity to National Regulations

Regulatory information, certification, and compliance marks are available on

the BLK3D. Go to

Android Settings

About phone

Regulatory labels

18.1.1

BLK3D

•

FCC Part 15 (applicable in US)

•

Hereby, Leica Geosystems AG declares that the radio equipment type

BLK3D is in compliance with Directive 2014/53/EU and other applicable

European Directives.

The full text of the EU declaration of conformity is available at the fol-

lowing Internet address: http://www.leica-geosystems.com/ce.

Class 1 equipment according to European Directive 2014/53/EU

(RED) can be placed on the market and be put into service

without restrictions in any EEA member state.

•

The conformity for countries with other national regulations not

covered by the FCC part 15 or European Directive 2014/53/EU has to be

approved prior to use and operation.

•

Japanese Radio Law and Japanese Telecommunications Business Law

Compliance.

•

This device is granted pursuant to the Japanese Radio Law (

電波法

)

and the Japanese Telecommunications Business Law (

電気通信事業法

•

This device should not be modified (otherwise the granted designa-

tion number will become invalid).

18.1.2

Dangerous Goods Regulations

Many products of Leica Geosystems are powered by Lithium batteries.
Lithium batteries can be dangerous under certain conditions and can pose a

safety hazard. In certain conditions, Lithium batteries can overheat and ignite.

☞

When carrying or shipping your Leica product with Lithium batteries

onboard a commercial aircraft, you must do so in accordance with

the

IATA Dangerous Goods Regulations

☞

Leica Geosystems has developed

Guidelines

on “How to carry Leica

products” and “How to ship Leica products” with Lithium batteries.

Before any transportation of a Leica product, we ask you to consult

these guidelines on our web page

(http://www.leica-geosystems.com/dgr) to ensure that you are in

accordance with the IATA Dangerous Goods Regulations and that the

Leica products can be transported correctly.

☞

Damaged or defective batteries are prohibited from being carried or

transported onboard any aircraft. Therefore, ensure that the condi-

tion of any battery is safe for transportation.

18.2

General Technical Data of the Product

Type

Value

Accuracy with favourable conditions

±1.0 mm

±0.04 in

Regulatory informa-

tion

Conformity to

national regulations

Dangerous Goods

Regulations

Laser distance

measurement

(ISO 163331-1)

Technical Data

Содержание BLK3D







































































Результаты поиска

Содержание BLK3D

Отзывы:

Похожие инструкции для BLK3D

Бренды по названию

Популярные бренды

Leica Geosystems BLK3D, Руководство пользователя

Результаты поиска

Содержание BLK3D

Отзывы:

Похожие инструкции для BLK3D

Бренды по названию

Популярные бренды