13
Leica SM2010 R
4.5 Assembling the knife holder SN
• Lock the knife sledge (
11
) in place using the
locking knob (
23
) so that it cannot be moved.
• The intermediate plate (
60
) intended for the
knife holder SN, is mounted on the mounting
table (
62
) of the knife sledge (
11
).
Installing the intermediate plate
• As shown in Fig. 9, place the intermediate plate
on the mounting table. Make sure that the two
index markings (
65
) are at the top and point
towards the back.
• Insert the five countersunk screws (
61.
1
–61.
5
)
into the bores and tighten them crosswise (in
the sequence shown in Fig. 10) using an Allen
key T25 (
63
).
23
23
60
62
65
64.1
63
61.3
61.5
61.1
61.2
61.4
64.2
11
4. Instrument Setup
Fig. 9
Important!
The mounting table must be absolutely
clean and dry. There must not be any
foreign particles on it. Otherwise, sec-
tions could become contaminated.
Fig. 10
Содержание SM2010 R
Страница 2: ......
Страница 44: ...42 Instructions for Use V1 6 RevG 10 2018 Notes ...
Страница 45: ......
