Aperio GT 450 IT Manager and Lab Administrator Guide, Revision E © Leica Biosystems Imaging, Inc. 2022
21
This chapter provides information you will use if you need to change the scanner settings, system information, or
configuration. The scanner configuration defines how the scanner communicates with SAM, and how SAM, in turn,
communicates with the various components on the network, including the Aperio eSlide Manager server, the DICOM Image
converter, and others. Also included are procedures for assigning scanner access PINs.
General Instructions
Only a user who is assigned the Lab Admin role can make configuration changes. Operators can view configuration settings,
but cannot change them.
Some of the configuration settings define how the scanner communicates with SAM, such as the Mac
Address and Hostname. The Serial Number uniquely identifies the scanner. Calibration settings define
how the scanner operates. These settings can only be changed by Leica Support personnel, and are
displayed in shaded fields.
There are three sets of scanner configuration parameters:
`
Basic Scanner settings
, such as the network address, name, and display language
`
Scanner System Information
, such as general information and detailed scanner and camera settings
`
Scanner Configuration settings
, such as communication settings for the DICOM Image converter and the DSR
server, event management, time zone, and PIN management
Each set of parameters is discussed in this chapter.
3
Configuring the Aperio GT
450 Scanner
