Leibinger RAPID Highspeed, Техническая информация

Страница: 10 / 31

Features and applications
Page 10 of 31
RAPID Universal
The RAPID Universal comes with the same print head as the JET3up. The main difference to the
JET3up is the higher oscillator frequency of the RAPID Universal.
With an oscillator, frequency of up to 128 kHz the RAPID Universal allows a 30% faster
operating speed than the JET3up with a 96 kHz oscillator frequency.
The RAPID Universal provides also the same fonts as the JET3up. Therefore, the higher
operating speed is available not only for a special range of high-speed fonts but for the whole
range of fonts.
If, for instance, a print job for the JET3up with a 32 dot high quality font allows a printing speed
of 30 meter/minute, it will be possible to print the same job with the RAPID Universal at a speed
of around 40 m/min.
In order to reach a good quality for the print outs at the faster speeds the recommended distance
between
print head and substrate is 15 mm.
The print head of the RAPID Universal: From the dimensions, the print head is equivalent to
the SK6 print head of the JET3up.
The print head works with the same range of fonts as the JET3up. Due to the higher operating
speeds, the recommended distance between print head and substrate is 15 mm.
Shorter distances bear the risk of contaminating the print head; larger distances may have a
negative effect on the quality of the printouts.
Recommended:15 mm
43 mm
212 mm