Settings
28
You will receive a notification when a new version is available. You can also go to the
Settings> System > Software update
to check if the New Update is available. If the
Wi-Fi is successfully connected, then it will show “Checking for update.”
2.
Download & Install
Click the New update available and click
DOWNLOAD & INSTALL
. The software build
will start the downloading process. It usually takes 3-4 minutes to finish the
downloading page
3.
Installing and verifying
After downloading 100% the page will move to Installing. Please let the installation
run until it reaches 100%. The checking page will show up after installing it. On the
checking page, it usually takes 5-10 minutes to finish the process.
4.
Restart
After the checking phase is done there will be a notification on the same page and
also on the pull-down menu about the restarting options. Users can either
RESTART
NOW
right away after the update or wait and choose to
REMIND ME LATER.
The total process will take about 10-20 minutes. During the update process, users can work
on something else and wait for the Software Update notification. It will be available on the
pulldown menu once it is finished.
Note
: If an error or failure message occurs, please wait and try again later.
Reset Options
To reset, Go to
Settings > System > Reset options
Warning:
Performing a factory reset will erase all settings, applications, and files stored on
your LUME PAD. As all data will be lost, it is recommended that you perform a back-up of
any needed files prior to using this function.
Settings
There are a couple ways to access your LUME PAD Settings Menu.
•
From Quick Settings
Содержание Lume Pad
Страница 1: ...USER MANUAL LPD 10W LPD 11W 08 04 21 ...
