4
Table of contents
Index
1 What you should know .......................................................6
1.1 Foreword .................................................................................................6
1.2 About this operating manual.................................................................... 6
1.3 Description of the
POLARO
®
L/XL ................................................................7
1.4 Intended use ............................................................................................9
1.5 Reasonably predictable misuse .............................................................. 9
1.6 Warranty ..................................................................................................9
1.7 About your safety .................................................................................. 10
1.8 Emergency Stop switch ......................................................................... 11
2 Mounting and starting ......................................................13
2.1 Install the frame ..................................................................................... 13
2.2 Set the working height of the spreading disk......................................... 15
2.3 Install the cross bar ............................................................................... 16
2.4 Electrical connection ............................................................................. 17
2.5 Fill and cover the spreading material tank............................................. 18
3
Operating the POLARO
®
L/XL ................................................ 20
3.1 Controls on the control panel ................................................................ 20
3.2 Indicators in the display ......................................................................... 21
3.3 Switch the spreader on and off .............................................................. 22
3.4 Switch the spreading disk and screw on and off ................................... 22
3.5 Calibration and spreading width ............................................................ 25
3.6 Set the speed of the screw/spreading disk............................................ 27
3.7 Set the working width ............................................................................ 27
