OMEGA
Installation Manual
Edition Dec. 2004
Omega
platform lift
page 19 of 24
Mounting the mechanical limit switches
•
Mount the plate with the limit switch on the C-profile on the lower tube of the railway.
•
Adjust the position of the plate in reference to the stop position of the platform.
Note:
The carriage must touch down slightly on the bottom with the buffers on the lower
end of the backside of the carriage in the lower stop position.
•
In the upper stop position (and also intermediate stop positions) the platform should be
in one line with the landing height.
•
Adjust bolt 1 and bolt 2 now, in reference to the bypass switch (see description in the
technical documentation, chapter 2.4.3 Bypass switch).
•
Run the carriage down to the lower landing again and stop it in the desired loading
position. The remote control will allow you to watch the platform.
Note:
Allow the carriage to bottom out on the lower landing.
•
Run the carriage out of the landings and back again. If the lift does not stop in the correct
position, adjust it as necessary.