BD
A M410 T
A03 / 2019-09 (GB)
6
GETTING STARTED & CHANGING BATTERY
Make sure that the lock and keypad are correctly connected to each other by the connection cable. Pay attention to
the correct connection of the plugs and sockets.
Open the battery compartment
as shown above.
Insert the battery first with the
minus pole as shown above. The
battery is placed on the battery
removal tape so that the tape tip
protrudes.
To remove the battery, pull on the
battery removal tape.
Close the battery compartment
with the tape inserted.
IMPORTANT:
Only use one CR123A primary battery!
