BD
A M410 T
A03 / 2019-09 (GB)
10
STRUCTURE OF THE KEYPAD TA03
You can cancel any operation at any time by pressing the cancel button
x
. When the cancel button is pressed,
there is one short red flashing. Any input already made is deleted.
During operation, make sure that each key input is acknowledged by a light signal at the LED display! If a light signal
does not appear, the key input was not accepted.
The optical signals are differentiated in colour and in duration as shown below:
Note:
If no further key input is made during the entry of a code or during a programming operation, the already made
entries will be discarded after 30 seconds. The old code remains valid.
After the third entry of an invalid code, the option to enter a code is blocked for 30 seconds. The LED display flashes
red for nine times. When a key is pressed during these 30 seconds, the LED display flashes red once.
Numbers 0-9
Cancel
Enter
LED display
Short flashing
Long flashing
Continuous light
BOLT END POSITION SCAN FUNCTION
The locking system also has a bolt end position scan function. If, during the locking process, the bolt does not reach
its end position, the LED display flashes red for four times. The lock is not locked. Check the correct mounting positi-
on of the lock, the bolt protector and the striker plate.
Trip point for removing
the cover for emergency
power supply
