Lehman Crossbow 2011, Руководство пользователя

Страница: 6 / 26

6
Bracket Installation
TAILLIGHT INSTALLATION
1. Remove Left and Right side Latch Assembly
Alignment Fixtures using 10mm socket.
2. See Fig. 1. Re-install modified tail section as
shown using (4) take off bolts with loctite 243.
Tighten top bolts using 13mm socket and bottom
bolts using 10mm socket.
•
(4) Bolt (take out)
3. Torque and mark upper tail section bolts to 22
ft. lbs using 13mm socket.
4. Torque and mark lower tail section bolts to 8
ft. lbs using 10mm socket.
5. See Fig. 2. Re-install taillight assemblies to tail
section as shown. Tighten using 4mm allen head
socket.
•
(2) Taillight Assembly (OEM)
•
(5) Bolt (take out)
NOTE: Run taillight wire harness in tail section
track.
6. Connect license plate light wire harness.
7. See Fig. 2. Install (2) U-Nuts to modified tail sec-
tion as shown.
•
(2) U-Nut (CN3302)
8. See Fig. 3. Install a 1” piece of 3M Double Sided
Tape to the left and right grab handle covers as
shown.
Fig. 1
Fig. 2
PART # PART DESCRIPTION TORQUE
TAKE OFF UPPER TAIL SECTION BOLTS (2) 22 FT LBS
TAKE OFF LOWER TAIL SECTION BOLTS (2) 8 FT LBS
Fig. 3
U-Nut
U-Nut