30
2014+ XL Raider
WARNING- 2014+ Models: Before the trike in-
stallation is complete, the Bank Angle Sensor
(BAS) setting must be changed in the Body
Control Module (BCM) from “Internal” to
“External”. This setting must be changed by a
Harley Davidson dealer. Failure to reprogram
BCM to correct setting may cause engine to
stall while riding. Death or serious injury may
occur.
•
(1) 14+ Bank Angle Sensor Kit– S002400
1.
See Fig. 1.
Install Bank Angle Sensor bracket
to seat post under body. Route wiring under
frame towards the battery.
2.
See Fig. 2
. Install
red
wire from sensor into #3
connector position next to the violet wire in
adapter harness. Verify red wire mates with
solid blue wire on opposite end.
3.
See Fig. 2
. Connect the
black
wire from the
Bank Angle Sensor to negative battery termi-
nal.
4.
See Fig 3
. Carefully slide BCM out of plastic
housing in front of battery.
5.
See Fig. 3
. Unplug BCM connector and tempo-
rarily remove the plastic cover.
BANK ANGLE SENSOR INSTALLATION
Fig. 2
Install red wire
into #3 position
Solid blue wire–
12v Ignition
Connect black
wire to negative
battery terminal
Remove BCM from
plastic housing.
Unplug connector and
remove plastic cover
Fig. 1
Mount BAS
bracket to seat
post under body
Fig. 3
