16
LEHLE GmbH · Germany · www.lehle.com · [email protected]
4. Connect the output of your effects unit
to the Return socket (5) of the LEHLE PAR-
ALLEL SW II.
5. Use the Send (9) and Return (11) con-
trollers of the LEHLE PARALLEL SW II to
fine-tune the level of the effects unit con-
nected.
6. Select the desired effect level using the
MIX controller (10) on the LEHLE PARAL-
LEL SW II.
7. Use the True-Bypass switch (12) to
switch between the original signal (LED
white) and the mix of the original and ef-
fect signals (the LED will then show blue).
8. Done!
Check the overall sound for any phase
cancellations and, if necessary, press the
phase reverse switch (4) on the LEHLE
PARALLEL SW II.
