14
LEHLE GmbH · Germany · www.lehle.com · [email protected]
HOW TO DO THIS
1. Connect your instrument to the Input
socket (1) of the LEHLE PARALLEL SW II.
2. Connect your amplifier to the Output
socket (6) of the LEHLE PARALLEL SW II.
3. Connect the Send socket (3) of the
LEHLE PARALLEL SW II to the input of
your effects unit.
4. Connect the output of your effects unit
to the Return socket (5) of the LEHLE PAR-
ALLEL SW II.
5. Use the Send (9) and Return (11) con-
trollers on the LEHLE PARALLEL SW II to
fine-tune the level of the effects unit con-
nected.
6. Use the MIX controller (10) on the LEH-
LE PARALLEL SW II to select the desired
effect level.
7. Use the True-Bypass switch (12) to
switch between the instrument’s original
signal (LED white) and the mix of original
and the effect signal (the LED will then
show blue).
8. Done!
No sound losses in Bypass mode: The
LEHLE-Switch (12), working with a micro-
controller and an intelligent True-Bypass-
Relay-Circuit with active pop suppression
circuit, makes sure that the signal passes
through a switched-off LEHLE PARAL-
LEL SW II with no loss (genuine “True-
Bypass”).
Check the overall sound for any phase
cancellations and, if necessary, press the
phase reverse switch (4) on the LEHLE
PARALLEL SW II.
