Lehigh SOLITAIRE WBX-4, Руководство пользователя

Страница: 16 / 18

OPERATION Page 13
F196
STORING A MODIFIED PRESET
In order to save any changes, the memory has to be in the unlocked mode. If the
memory is locked and changes are attempted, the following message will be shown
on the display:
To unlock the memory see page 10, under the heading "Configuring the Station", for
further information on Partial Lock Mode. The memory has to be unlocked before
any changes are made to the preset.
Press to save the modified preset to memory. This
will overwrite the previous values in the
preset.
Note: The Store Button may also be pressed at any time during an active fade.
Whatever level the lights are presently at during the fade will be stored in memory.
MODIFYING A FADE TIME
Activate the desired preset. The current fade time will be shown on the display.
Remember, the fade time is in minutes if the decimal point is lit and in seconds if it is
off. The fade time will start to count down as the lights are fading. "Change Fade
Time Mode" may be entered at any time during the fade or after the fade has
completed.
Press and the display will blink the fade time value
that is stored in memory (10 minutes is
shown).
Press to increase or decrease the fade time as needed,
until the desired fade time is reached. A fade time
of 2 seconds up to 60 minutes may be set. Use the
Master Up Button to raise the fade time and the
Master Down Button to lower the fade time.
Press
to save the new fade time to memory. The
old value will be overwritten and the display
will be blank.
Press the Fade Time Button again to exit "Change Fade Time Mode" without saving a
new fade time.