Lehigh SOLITAIRE WBX-4, Руководство пользователя

Страница: 14 / 18

OPERATION Page 11
F196
OPERATING THE STATION
The station has to be in All Unlock Mode in order to operate. The station is locked
when a button is pressed and the following error message is displayed:
To unlock the station see page 7, under the heading "Configuring The Station", for
further information on All Lock Mode.
ACTIVATING A PRESET
Press 1 thru 6 or Off to activate the desired preset.
The LED under the preset button that was pressed will light to indicate that the
preset is now active. The Fade Time associated with the preset will be shown on the
display. If the decimal point on the right side of the display is lit, the Fade Time is
counting down in minutes. If the decimal point is not lit, it is counting down in
seconds.
10 minute 10 second
fade time fade time
If the starting fade time is in minutes, it will count down in minutes until 59 seconds
remain. At 59 seconds, the decimal point will turn off and the fade time will count
down in seconds until time expires. When the fade is complete, the display will be
blank and the lights will be at their final levels.
TEMPORARILY MODIFYING AN ACTIVE FADE
1) To speed up an active fade, repress the selected preset’s button. Each press of
that Preset Button will cut the fade time in half. For example, a fade time of one
minute will be cut in half to thirty seconds with the second press of the selected
preset’s button, to fifteen seconds with the third press, and so on until the fade is
complete (the display will be blank). This is a good way to speed up the fade
without changing the value stored in memory.