Leguan 135 NEO Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 66

background image

32

Override of boom safety functions when motor is running

For possible emergencies this access platform is equipped with a safety functions override
switch (p. 20, figure 8, switch 2), which enables boom movements without outriggers being
correctly set down. This function can be used for example in a situation when booms have
moved off their transport support during transportation.

To use the switch in the lower controls panel:

1.

Loosen the screws (lower controls, screws A and B) to detach the protecting plate

2.

Turn the override switch clockwise and hold it turned

3.

Turn on combustion engine or electric motor

4.

Lower the booms

slowly with caution

5.

Release the override switch

6.

Turn off engine / motor

7.

Attach the override switch

’s protecting plate (screws

A and B)

The function bypasses / allows:

-

overrides overload

-

decreases outreach monitoring by 62,5 kg

-

overrides platform levelling monitoring (automatic platform levelling is operational)

-

overrides telescope chain monitoring

-

overrides outrigger monitoring

-

overrides speed selector switch (dead

man’s

switch)

-

allows telescope in movement to remove overload

Override of boom safety functions using the hand pump

This function is activated from the lower controls panel with the emergency stop switch pushed
down and the only available power supply is the hand pump. Allows boom operation manually
from the lower control switches without safety functions or automatic aides.

Override of drive and outrigger safety functions

This function is activated from the lower controls panel (p. 20) when platform controls are
selected. Normal power supplies or alternatively the hand pump can be used. Movements are
controlled from the platform control panel. Hand pump can be used to operate outriggers.
When an engine/motor is running both drive and outriggers can be used.

This function overrides:

-

transport position monitoring

Override switch should only be used in extreme emergencies!

NOTE! Hand pump can only be used to operate outriggers and booms.

«
...
30
31
32
33
34
...
»

Содержание 135 NEO



































































Отзывы:

Нет отзывов

Похожие инструкции для 135 NEO

Бренд: Olimpia splendid Страницы: 40

Бренд: Clarke Страницы: 8

OBID ID ISC.ANT40/30

Бренд: Feig Electronic Страницы: 2

Бренд: Estun Страницы: 41

PRECISION TIG 185

Бренд: Lincoln Electric Страницы: 104

Бренд: Wesco Страницы: 20

Бренд: ZiLOG Страницы: 241

Бренд: National Instruments Страницы: 28

SPACOMMAND CP3800 Series

Бренд: Pentair Страницы: 36

Бренд: Fenix Страницы: 24

Бренд: Feig Electronic Страницы: 21

Бренд: Liko Страницы: 37

Бренд: Demtech Страницы: 25

Бренд: Ingersoll-Rand Страницы: 64

R7G4FML3-6-DA16

Бренд: M-system Страницы: 10

Бренд: Elettro CF Страницы: 38

Бренд: Parkside Страницы: 72

Бренд: Brewtools Страницы: 22

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды