7
1
2
3/8 in.
(10 mm)
3 in. (7.6 cm)
002862.eps
07
07
CAUTION:
Avoid potential personal injury or property damage!
•
Mount wall plate
08
directly onto concrete surface (no wall covering)
•
Minimum solid concrete thickness: 8 in. (203 mm)
•
Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
Solid Concrete or Concrete Block Installation
STEP 2B Attach Wall Plate
3
4
08
CAUTION:
Be sure the anchors
C1
are seated flush with the concrete surface.
CAUTION:
Never drill into the mortar between blocks.
Go to STEP 3 on PAGE 8.
4X
Concrete Installation Kit CMK1 is not included
Contact Customer Service at 800-359-5520
to inquire about the additional hardware.
Fischer UX10 x 60R
C1
- included in the Concrete Installation Kit CMK1.
C1
Min.
16 in.
(406 mm)
09
10
CAUTION:
Avoid potential personal injury or property damage!
Improper use could reduce the holding power of the lag bolt
09
.
Tighten the lag bolts
09
only until the washers
10
are pulled FIRMLY
against the wall plate
08
.
DO NOT over-tighten the lag bolts
09
.
