PXC Quick Setup Guide
5
PXC_QSG_0A_3.5.0_E
255-80-0059-00 RoHS
Android
: USB-B port
Step 3: Launch PDView
You can access the PXC web interface via PDView to view or
change the settings.
To access the PXC web interface:
1.
Launch PDView on your mobile device.
2.
Wait until PDView detects the connected PXC and shows
the word "Connected" in green.
3.
If the factory-default user credentials "admin/raritan"
remain unchanged, PDView automatically logs in to the
web interface of PXC.
If they have been changed, the login screen displays
instead and you must enter appropriate user credentials
for login.
4.
(Optional) For initial login, you are prompted to change the
password. See
Step 2: Log in to the PXC Web Interface
(on page 4).
5.
Now you can view the data or change any PXC settings.
For details, refer to the user guide or online help on
the Raritan website.
QS Rule
Appendix B: Wireless LAN Information
USB Wireless LAN Adapters
The PXC supports the following USB Wi-Fi LAN adapters.
Wi-Fi LAN adapters
Supported 802.11
protocols
SparkLAN WUBR-508N
A/B/G/N
Proxim Orinoco 8494
A/B/G
Zyxel NWD271N
B/G
Edimax EW-7722UnD
A/B/G/N
TP-Link TL-WDN3200 v1
A/B/G/N
Raritan USB WIFI
A/B/G/N
Connecting the Wireless LAN Adapter
You can connect the wireless LAN adapter either to the PDU
or to a USB hub attached to the PDU.
To make a wireless connection:
Do one of the following:
Plug a supported USB wireless LAN adapter into the
USB-A port on your PXC.
Connect a USB hub to the USB-A port on the PXC.
Then plug the supported USB wireless LAN adapter
into the appropriate USB port on the hub.
Supported Wireless LAN Configuration
If wireless networking is preferred, ensure that the wireless
LAN configuration of your PXC matches the access point. The
following is the wireless LAN configuration that the PXC
supports.
Network type: 802.11 A/B/G/N
Protocol: WPA2 (RSN)
Key management: WPA-PSK, or WPA-EAP with PEAP
and MSCHAPv2 authentication
Encryption: CCMP (AES)
Tip 1: Supported 802.11 network protocols vary according
to the wireless LAN adapter being used with the PXC. See
USB Wireless LAN Adapters
(on page 5).
Tip 2: You must configure PXC to enable its wireless LAN
interface. See the topic titled Configuring Network
Settings in the
User
Guide.
QS Rule
Appendix C: More Information
Disconnecting Devices from 'Locking' Outlets
Not every PXC is implemented with locking outlets.
Locking outlets, if available on your PXC, help secure the
connection of power cords from your IT equipment to PXC.
