LEGRAND radiant WWRL10WHCCV2, Руководство пользователя

Страница: 2 / 14

before you start
Review this guide in its entirety. Consult an electrician with any questions or if
you are unsure of your abilities.
Warning: Incorrect installation could result in death, serious injury, and/or
damage to your home or devices.
Caution: To reduce the risk of injury and/or overheating and damage to
other equipment:
• For dry, indoor use only.
• Do not use to power medical
equipment.
• Not suitable as a disconnecting
means.
• Do not use with loads exceeding the
device load rating.
what you need
REQUIRED:
Phillips-head screwdriver
Flat blade screwdriver
• Connect the smart switch to a 120
VAC, 60 Hz power source ONLY.
• Always use copper wire to install
the smart switch and follow all
applicable local and national
electrical codes.
Visit www.legrand.us/radiant/smart-lighting/support for support.
YOU MAY ALSO NEED:
Voltage tester, pliers, wire cutter, wire
stripper, electrical tape, fl ashlight, wiring
leads (included), and wire nuts (included)
SCAN TO WATCH THE
INSTALLATION VIDEO