64
Dedusting setting
When the module works for too long and the inner temperature is too high, you can perform the force dedusting
operation. Click dedusting setting, enable the regular self-dedusting setting to start force dedusting. Once the
output exceeds 60% of rated output, it will not perform the dedusting operation.
When setting the system time, ensure that the setting value is same as that of the real
clock time. This is to keep the veracity of the system event log and for ease of maintenance.
CAUTION
Figure 5-48. Dedusting setting page
Figure 5-49. HMI setting
5.6.5 HMI Setting
In setting management page, click HMI setting icon , it will enter HMI setting page, as shown in Figure 5-49.
5.6.6 Password setting
In setting management page, click password setting icon , it will enter password setting page, as shown in
Figure 5-50. The password is the Arabic numerals from 1 place to 6 places. After modifying, click Confirm
button to perform the modification.
5.7 Buzzer control
When unit or system is abnormal, the system will send sound alarm. User can click the left buzzer indicator
icon to close/open the buzzer. After closing, if a new fault happens, the buzzer will be opened automatically.
5.8 ON/OFF
In system setting page, click icon, it will enter ON/OFF page.
While powering on, click button, it will enter the ON/OFF page, as shown in Figure 5-51, click OK button
to perform the startup operation.
Figure 5-50. Password setting
Regular Self-dedusting Period(day)
Dedusting
Back
Save
Generator
Regular Self-dedusting
Off
10
System Force Dedusting
Off
On
Time(h/m/s)
Back
Language
Date(y/m/d)
2015
08
21
18
English
3
00
00
Screensaver(min)
Backlight Brightness
Back
Old Password
New Password
Password Confirm
Save
