58
Figure 5-35. Setting failure
Figure 5-36. Bypass setting 1
Bypass setting
Click Bypass Setting, it will turn to bypass setting page, as shown in Figure 5-36. Click enter box to change the
parameter. Click Save button to save the setting. The marks of setting success and setting failure is the same
as that of system setting.
ECO setting
Click ECO Setting, it will turn to ECO setting page, as shown in Figure 5-38. Click enter box to change the
parameter. Click Save button to save the setting. The marks of setting success and setting failure is the same
as that of system setting.
Figure 5-37. Bypass setting 2
Figure 5-38. ECO setting
Note:
At the top of the enter box, it shows the max. and min. setting value of the setting item, and once the
setting value exceeds the range, the setting will be invalid.
Output Freq. Tracing Rate(Hz/s)
Output Voltage Adjustment(V)
System Set
Bypass Set
ECO Set
0.0
-5.0
Next
Back
Save
Bypass Volatge Upper Limit(%)
Bypass Volatge Lower Limit(%)
Bypass Frequency Range(%)
ECO Voltage Range(%)
ECO Frequency Range(%)
System Set
Bypass Set
ECO Set
+10
-10
+2
+2
0
Next
Back
Save
INV. Bypass Out Of Syn.Alarm
Bypass Max-Time Turn INV.T0 Byp. Syn. (ms)
The Max-Time Turn INV.T0 Byp.Syn.(ms)
System Set
Bypass Set
ECO Set
Off
0
0
Next
Back
Save
Manual Mode Set
Timing Mode Set
Timing Ending Time
Timing Cycle
Regular Open Time
:
:
:
:
System Set
Bypass Set
ECO Set
OFF
OFF
Back
Save
0
0
0
0
MON
TUE
WED
THU
FRI
SAT
SUN
0
0
