background image

1

INSTALLATION INSTRUCTIONS

F-4558_041013

Luminaire for Parking Garages

TEKDEK

™ 

LED

1.

 Bird Guard lays on top of casting.

TD17 SERIES

IMPORTANT SAFEGUARDS

When using electrical equipment, basic safety precautions should always be followed, including the following:

THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE 

CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED. 

CE PRODUIT DOIT ÊTRE INSTALLÉ EN CONFORMITÉ AVEC LE CODE DE L'INSTALLATION PAR UNE PERSONNE QUI connaît BIEN LA CONSTRUCTION ET LE 

FONCTIONNEMENT DU PRODUIT ET LES RISQUES ENCOURUS.

DISCONNECT POWER TO ALL CIRCUITS BEFORE WIRING FIXTURE. INSTALL IN ACCORDANCE WITH ALL NATIONAL, STATE, AND LOCAL CODES. DO 

NOT CONNECT TO AN UNGROUNDED SUPPLY. READ ALL FIXTURE MARKINGS AND LABELS TO ENSURE CORRECT INSTALLATION OF FIXTURE. 

SUPPLEMENTAL INSTRUCTIONS MAY BE LOCATED ON THE FIXTURE, IN ADDITION TO THIS INSTRUCTION SHEET, REGARDING ORIENTATION, OR 

MOUNTING RESTRICTIONS.

SAVE THESE INSTRUCTIONS

Pendant Mount

Trunnion Kit 

BIRD GUARD INSTALLATION - PENDANT MOUNT & TRUNNION KIT 

(For Trunnion Kit remove tabs)

2.

 Attach both sides with (4) screws provided.

NOTE: For LEL option, align hole in bird guard with LED indicator

Содержание Kenall TEKDEK LED TD17 Series










Отзывы: