ODA330
Installation Instructions
6
Assembly And Installation
1.
Install eight 3/8" washers (E) onto eight M8 x 75mm anchors
(G). (See Figure 1)
Figure 1
2.
Position template (on packaging insert) for floor/ceiling plate
(A) on floor or ceiling at desired installation location.
NOTE:
If installing a two-plate mount (OLC2X1U/OLCB2X1U/
OXCM1U/OXCB1U), refer to dimensions drawings in
the installation instructions for that specific
configuration to determine distance between two
plates.
3.
Mark two locations of outside keyhole-shaped holes. (See
Figure 2)
IMPORTANT ! :
Holes must be drilled in exact locations
in order to be properly installed. Make sure hole locations
are marked precisely!
4.
Drill two 5/16" or 8mm holes with a depth of 2 7/8" at each
marked mounting hole location. (See Figure 2)
Figure 2
5.
Partially install two M8 x 75mm concrete anchors (G) into
two drilled on opposite corners. (See Figure 3)
WARNING:
Floor/Ceiling plate (A) weighs nearly 30 lbs
(13.6 kg). Use two people to install floor/ceiling plate to
ceiling. One person holds floor/ceiling plate in position while
the other person drills holes.
6.
Lift floor/ceiling plate (A) up to M8 x 75m concrete anchors
(G), placing the two key-sized holes over the anchors. (See
Figure 3)
7.
Turn floor/ceiling plate (A) so that anchors (G) are
positioned in small section of key-sized holes. (See Figure
3)
Figure 3
8.
Tighten two anchors (G). (See Figure 4)
9.
Mark and drill two 5/16" or 8mm holes with a depth of 2 7/8"
for two remaining outside holes. (See Figure 2)
10. Install two M8 x 75mm concrete anchors (G) through
outside holes and into drilled holes. (See Figure 4)
Figure 4
1
(E) x 8
(G) x 8
x
x
x
x
x
x
x
x
x
x
x
x
3
9
3
9
11
11
11
11
4
5/16" or 8mm x 2 7/8"
(bottom view)
5
(G x 2)
6
6
7
7
8
x 2
(G) x 2
10
