LPE1U
Installation Instructions
12
3.
Determine and mark the vertical center position between
the Left side Upper and Lower mounting holes in display.
(See Figure 15)
4.
Determine and mark the vertical center position between
the Right side Upper and Lower mounting holes in display.
(See Figure 15)
5.
Orient vertical mounting bracket (WR) so that mounting
holes are on top and mounting slots are on bottom. (See
Figure 15)
Figure 15
6.
Align mounting holes in vertical mounting bracket (WR) with
upper and lower mounting holes in display.
7.
Adjust vertical mounting bracket (WR) position until mark
made in Step 1 aligns with center mark in vertical mounting
bracket (WR).
8.
Select correct screws, nesting spacers (if necessary) and
universal washers (if required) from the hardware bag (WA-
WM) and attach brackets to back of screen. (See Figure 17)
IMPORTANT ! :
The M8 screws do
NOT
require a
washer. Use the universal washer (WMB) only with M4,
M5 and M6 screws.
NOTE:
The nesting spacers (WMA) may be used separately,
or put two together in different configurations to create
different size spacers. (See Figure 16)
Figure 16
6
3
(TR) x 2
Mounting holes
Mounting Slots
(Single)
(Nested)
(Stacked)
0.375
[9.5]
0.563
[14.3]
0.750
[19.1]
Figure 17
10
8
(WR) x 2
(WMA) x 4
(WA through WL)
x 4
(WMB) x 4
(WR)
