Product Overview
Front Panel
2
F
RONT
P
ANEL
D
ESCRIPTION
1 P
OWER
LED
On:
Power is applied to the device.
Off:
No power is applied to the device.
2 STATUS LED
Blinking:
The device is working properly.
Off:
The device is not working properly.
3 HDCP LED
On:
HDCP protected content is being transmitted.
Blinking:
Non-HDCP protected content is being transmitted.
Off:
No content is being transmitted.
4 LINK LED
On:
HDBT link is normal.
Off/Blinking:
No HDBT link or link error.
5 RS232 DIP S
WITCH
Set the function of RS232 port.
•
PASS-THROUGH (Default):
RS232 port is used for RS232
commands pass-through over HDBT.
•
MCU:
RS232 port is used to update MCU firmware.
•
VS:
RS232 port is used to update Valens firmware of
transmitter and receiver.
R
EAR
P
ANEL
D
ESCRIPTION
6 DC 12V
DC 12V power input; connect to the power adapter provided.
7 HDBT IN
Connect to HDBT OUT of the transmitter via a Cat 5e/6/6a/7 cable.
With POH OUT, the transmitter can be powered by this receiver.
8 RS232
For RS232 pass-through or firmware upgrade, and can be set through
DIP switch on front panel.
9 HDMI OUT
Connect to an HDMI display using an HDMI cable.
10
2x AUDIO OUT
Unbalanced stereo audio output.
DE-EMBED:
For audio de-embedding from the HDMI output.
PASS-THROUGH:
For audio pass-through from Audio In port on the
transmitter to this port.
11 4x USB-A
Connect to USB devices such as keyboard, mouse, USB camera, etc.
Note:
USB ports support USB 2.0 standards with a maximum of 1.4A
for the top two ports and 0.6A on the bottom two ports. USB cameras
are recommended to be connected into one of the top two 1.4A ports.
Receiver
Receiver
Rear Panel
(us)
(us)
HDMI® H 3.5mm, USB
-
A, and RS232 over Cat Audio De
-
Embedding
Extender Box Receiver
-
4K 60Hz
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
Содержание C2G31020
Страница 2: ......
