LEGRAND 4 306 60, Руководство пользователя

Страница: 16 / 87

16
16
4 Installation
4.1 Lens Installation
4.1.1 Install Auto iris Lens
Follow the steps listed below for auto iris lens installation.
1- Remove the sensor protection cap of the device, and then line up the lens to the proper installation position.
Turn clockwise until the lens is fixed firmly.
2- Insert the lens cable socket to the auto lens connector in the side panel.
3- When it is ∞, you can turn the ADJUST screw to adjust the focus circle to adjust the focal distance.
4.1.2 Install Manual Lens
Install C type lens
- Remove the sensor protection cap; use the cross-head screwdriver to remove the screw near the focal circle.
- Turn counter clockwise to move the focal circle out for several millimeters.
- Focus manually.
- Use the cross-head screwdriver to fix the screw back firmly. Secure the focal circle.
- Install the C/CS adapter to the camera.
- Finally, line up lens to the proper installation. Turn clockwise to fix the lens firmly.
Install CS type lens
- Remove the sensor protection cap; use the cross-head screwdriver to remove the screw near the focal circle.
Turn counter clockwise to move the focal circle to the end and now you can focus manually.
- Use the cross-head screwdriver to fix the screw back firmly. Secure the focal circle.
- Finally, line up lens to the proper installation. Turn clockwise to fix the lens firmly.