5/9
Technical data sheet: S000105459EN-2
Updated: 25/02/2021
Created: 05/12/2018
Microwave detector - DALI/DSI dimming
Cat. No(s): 0 489 55/56/57
CONTENTS
6. OPERATION (CONTINUED)
Switching according to Lux level
Occupancy detection can be made dependent on the ambient light
level using the Lux On Level and Lux Off Level parameters.
Allumage
Extinction
Occupation
détectée
Plus
lumineux
Plus
Sombre
Seuil de luminosité
Off
Seuil de luminosité
On
Niveau d’éclairement
Temporisation
de luminosité ON
*
*
*
*
Temporisation
de luminosité OFF
**
Regulation according to light level
The detector measures the overall light level in the detection area, then
calculates and dims the luminaire lighting to achieve a preset Lux level
(maintained lighting or daylight harvesting).
Burn-in
Overview - It is a requirement of many fluorescent lamp manufacturers to
have the lamps on at maximum output for a period of time to guarantee
lamp life (refer to the manufacturer’s data sheet for more details).
Operation - By setting the “Burn-in” parameter, you can select a time
during which the lamps are not allowed to deviate from maximum
dimming. The unit counts the time, and even remembers how long has
elapsed in the event of a power failure. To cancel the burn-in function,
simply select a time of 0. Note that when the lamps are changed, the
burn-in time should be set again.
7. SETTINGS
The detector functions are controlled by a number of parameters which
can be changed or programmed by an infrared configurator.
In combination with configuration tool 0 882 40, the Legrand Close
Up smartphone app can be used to view and modify all the detector
parameters with online help.
Point the infrared configuration tool at the detector for all read/write
operations.
Valid commands will be indicated by a red flashing LED on the product,
and the lighting switches off automatically for all read/write operations.
Before changing the settings, an initialisation operation must be
performed as suggested in the Legrand Close Up configuration app:
1 - Click on “Scan product settings”
2 - Click on “Settings details/copy”
3 - In the menu at the top right (…) select “Initialise”
4 - Click on “Write product settings”
This operation allows predefined setting of certain parameters.
