Leggett & Platt Sleep Comfort, Руководство пользователя

Страница: 16 / 24

Sleep Comfort™ Adjustable Base Owners Manual 99301076-b
16
sc-mr2 remote controL Programming
(1 remote control - 2 bases)
The three step procedure below is required to program 1 remote control to operate 2 bases.
Before beginning, make certain the base is plugged into a working grounded electrical outlet.
If
programming fails, initiate the programming procedure a second time.
BED 1
BED 2
steP 2
On the remote control, simultaneously press and
hold the
PoS 1 and head massage on/off buttons .
The transmission indicator light will flash slowly
and then flash rapidly to indicate programming
mode.
Continue to hold for 5 seconds and then
release the buttons (
FIGURE 8
).
steP 3
Repeat Step 1 and Step 2 for base 2.
One remote control is now programmed to
operate two bases.
steP 1
Locate the power down box for base 1 and
press the learn button for 1 second and release
(
FIGURE 7 ) .
POWER
DOWN BOx
LEARN
BUTTON
FIGURE 7: Power down box learn button.
POS 1
BUTTON
HEAD
MASSAGE
ON/OFF
BUTTON
TRANSMISSION
INDICATOR LIGHT
FIGURE 8