S-cape
®
2.0 / S-cape
®
+ 2.0 / Simplicity™ 3.0 Owners Manual 290-0010-c
8
iNStallatioN
SteP 9
Install mattress retainers at the foot end of the adjustable base as
follows:
a. Locate grommeted holes at foot of base (
FIGURE 5
).
b. Place mattress retainer ends into grommeted holes in top
surface of adjustable base (
FIGURE 5
). Press down until
horizontal retainer section is flush against base.
MATTRESS
RETAINER
Simplicity
™
3.0
BASE SHOWN
(articulated)
FIGURE 5
mattreSS retaiNer iNStallatioN (oPtioNal)
Mattress is equipped with a Micro-Hook™ system
to captivate the mattress (
FIGURE 4
), but if
desired a mattress retainer can also be used. If
installing a mattress retainer, proceed to Step 9.
If not installing a mattress retainer, proceed to
Step 10.
FIGURE 4
Micro-Hook
™
SYSTEM
IMPORTANT!
THIS PRODUCT SHOULD
NOT
BE USED WITH
EITHER A DUST RUFFLE OR A MATTRESS
ENCASEMENT. IF EITHER A DUST RUFFLE
OR MATTRESS ENCASEMENT IS NEEDED,
THEN A MATTRESS RETAINER BAR IS
REqUIRED.
Micro-Hook
™
DETAIL
Typical adjustable base installation is now complete.
SteP 10
Install mattress on adjustable base.
