Leggett & Platt brio 20, Руководство пользователя

Страница: 9 / 16

brío™ Owners Manual 99301358-b
9
steP 6
Plug electrical power cord into a working, grounded electrical outlet.
Note: an electrical surge protection device is recommended (not included).
steP 7
If remote control is non-wired type, install batteries in remote control
(wired remote controls do not require batteries) (
FIGURES 2 thru 5 ).
Briefly activate all functions of the base with the remote control to verify
all features are in working order. If base does not operate, refer to the
Troubleshooting section of this manual.
FIGURE 2
FIGURE 4
FIGURE 3
FIGURE 5
PRESS IN
ON TAB
TO REINSTALL BATTERY
COMPARTMENT DOOR,
PLACE BOTTOM TABS IN
SLOTS AND LOCk TOP
TAB BACk INTO PLACE
BATTERY COMPARTMENT
DOOR REMOvED
BATTERIES
INSTALLED
BOTTOM
TABS
BOTTOM TAB SLOTS
LIFT BATTERY
COMPARTMENT
DOOR UP
AND BACk TO
DISENGAGE
installation
PRELIMINARY