2kw Fan
Switch
1kw Fan
Switch
On/Off
Switch
Temperature
Control Switch
USER INSTRUCTIONS
Fig.1
Plug in the fire and ensure it is switched on at the mains.
To operate the fire (Fig. 1)
Ensure the
switch is in the on (I) position. This will
illuminate the fire when no heat is required.
This switch will also need to be on to use any of the
elements.
To operate the 1kW fan press switch
To operate the 2kW fan press both switches & .
The room temperature can be set by adjusting the heat
temperature control switch up or down, this will
automatically turn the 1&2kW fans on and off to maintain
the room temperature at the desired level. Note the 1kW
fan switch must be switched on to operate the
temperature control switch
Fan unit cut-out
The fire will automatically cut-out to prevent damage
from overheating. If the airflow is obstructed or restricted
in anyway; the heater will automatically switch off. Switch
the fire off (0) and after a suitable cooling period remove
the obstruction. Switch fire on (I) again.
Important notes on Fan Heaters
You may experience a low volume noise due to air flow
through the fan and the blower. This is quite normal and
in no way impairs the working of the appliance.
