1.Make sure the unit has power. If it does not, the
will not work.
2.If it has, but the functions do not work, please
functions
e-mail us at
14
This product is for
residential use only
.
Any and all commercial
use of this product voids all warranties, and frees
the
manufacturer from all liability.
Read and understand all assembly and operating instructions,
and all safety information and warnings, before use. The
following will void this warranty: Damage caused from
tampering with, modifying, or altering the fireplace insert in any
manner; Damage due to incorrect assembly, improper care,
misuse, or abuse; Damage from being used with the wrong
power source; Water damage; Damage caused from this insert
being used outdoors; Damage caused from this insert being used
for excessive periods of time; Damage caused by the insert being
used in a commercial application; Damage from use as a primary
heat source; Other misuse or abuse not specifica lly listed herein.
This product is not intended to be used as a primary heat
source. It is for supplemental heating purposes only.
8.
TROUBLESHOOTING GUIDE
PROBLEM
SOLUTION
1.Make sure the power cord is plug ged into a
functioning and properly grounded 15 Amp 120V AC
electrical outlet.
2.If the unit had been working, but then turned off by
itself, the temperature limiting control may need to
be reset.
3.Check for damage to the power cord or plug. If
damaged, DO NOT USE.
The control
panel
functions
do not
work.
There is no
power to
the
fireplace ,
or it does
not turn
on.
