ACC-905 PC PROGRAMMER
For PL2215P, PL2245P, PL2415, PL2445
Page -4-
October 2001
SOFTW
ARE INST
ALLA
TION
SOFTWARE INSTALLATION
Making A Backup Copy
(Floppy disk versrion only)
Before installing the ACC-905 Programming Software on your computer, make a
backup copy of the disk. The software occupies approximately 5 MB on the disk and
can be copied onto four 1.44 MB disks.
To make a copy of a floppy disk using Windows® 95
1. In My Computer, left click the 3 1/2 Floppy (A:) icon for the disk you want to copy.
2. On the File menu, click Copy Disk.
3. Click the drive you want to copy from and the drive you want to copy to, and then
click Start.
4. Note: Any existing information on the disk you copy to will be deleted.
5. Use the backup disk in the disk drive as the working disk; keep the original disk in
a safe place as a master copy.
Installing The Software from Floppy Disk
Installing Onto A Hard Disk
1. Insert the ACC-905 disk in the disk drive.
2. Click the Start Menu, then select Run... and type: “A:\Legacy PC Program-
mer.exe” (or appropriate drive).
3. Close the information box by either pressing return or clicking on the “OK” button.
4. The program will automatically install the ACC-905 program in the following direc-
tory: C:\Program Files\Programmer
Installing The Software from CD
1. Insert the ACC-905 disk into the CD-ROM drive.
2. If the install program does not auto-start, then: goto the Start Menu
3. Click on Run
4. type D:\Legacy PC Programmer.exe (where D: is your CD-ROM drive)
5. Follow the on-screen instructions.
