ACC-905 PC PROGRAMMER
For PL2215P, PL2245P, PL2415, PL2445
Page -9-
October 2001
SYSTEM OPTIONS
SYSTEM OPTIONS
This tab is where all the radio wide options are set. Settings on this tab will affect
every channel of the radio.
Figure 6: PL2215P, 2245P, 2415 & 2445 System Options Tab
Max Channels
Sets the maximum channels that will be used in the radio. For example, you have a 4
channel radio, but will only program two of those channels. This number will then be
set to 2.
TX Delay
Enables the carrier to hang after the PTT has been released. This is useful for elimi-
nating squelch tail when using CTCSS or DCS.
Busy Lock Enable
Busy Lock is used to prevent the radio from transmitting on a busy channel.
Marked Idle Enable
Used in conjuction with Busy Lock Enable, this functions allows the radio to transmit
only if the correct carrier and CTCSS or DCS are received.
