Leenders WALD, Руководство по установке

Страница: 12 / 12

WALD LEENDERS
2019. 49.002.I.EN
General instructions and regulations
Installation
For the validity of the guarantee the Wald must be installed by a professional fitter employed by a
recognised Leenders dealer. See leenders.nl for a current list of addresses of approved dealers or
contact the factory.
The stove is susceptible to scratching: caution is recommended. Stoke the stove following the
instructions in the manual.
Use
• All local regulations, including those reffering to national and European standards must be
observed when fitting the appliance.
• ensure ample ventilation/air supply in the room where the stove is installed. Air extraction, such
as an extractor hood, can cause problems in the form of flue gases escaping from the stove into
the room.
• The appliance is suitable for use with a chimney ventilator.
• The appliance is suitable for sharing a flue.
• This appliance must be fitted to a ceiling that can easily support the load.
• Ensure there is ample access for cleaning the appliance, the flue gas connection and the chimney.
Safety regulations
• For matters of general safety, we refer you to the VCA guidelines.
• Glass is very fragile and broken glass is very sharp. Take sufficient safety precautions.
• Please note that after installation no combustible and/or materials with a danger of exploding
should be placed in the stove, like spray cans, packaging materials and such like.
Safe distance for Wald from combustible materials
• Rear wall: 15 cm.
• Side wall: 80 cm.
• Front: 110 cm.
Wald specifications
• Nominal capacity = 7,9 kWh
• Heat emisson capacity = 7,9 kWh
• Flue gas mass flow = 7.5 g/s
• Mass appliance = 145kg
• Minimum chimney draught = 0.12mbar
• Flue gas temperature directly above the stove = 209 °C
• Energy Efficiency 82,9%, class A+, 111,4 index