Leedarson HSA11FWB, Быстрый старт

Страница: 6 / 8

Off The Smart switch is turned off and the switch is not
configured
Solid Green The Smart switch is turned on
Triple Blink Orange When the countdown starts, triple blink orange, and light on
or off LED indicator according to the actual situation
Connect to the network
Status Behavior
To be configured status
LED indicator green and orange scrolling
blinking.
Remark: Powering on switch, is ready to
start switch network configuration
Connecting to the network LED indicator quick blinking orange
statue.
Connected to the network LED indicator keeps in green status for
3s and then turns off. If switch is not
turned on.
Connected failed. LED indicator keeps in red status for 3s
and then turns off.
Remark: while connected failed, led
indicator turn off, to reset the smart
switch to factory settings.
Factory default (reset) Hold “on” and “off” button for a total 5
seconds, and LED solid red, release the
button and it will reset. After a total 5
seconds, switch get into to be
configured statue.
Troubleshooting
Problems Possible cause
Lights Flickering Lamp has a bad connection
Wires not secured firmly under terminal screws of
switch
Light does not turn ON
and LED indicator does not
turn ON Circuit breaker or fuse has tripped.
Lamp is burned out.
Lamp Neutral connection is not wired.
Light can be turn ON and
LED indicator does not turn
ON The switch have not be configured, reset switch and
connect into network.
Remote does not operate Confirm switch is connected to the network