6
4.
Once the sensor detects a water leak, the LED Indicator flashes and the alarm beeps once per
second. The alarm signal will be sent to the gateway once every 5 minutes. During the alarm status,
the user can mute the buzzer by using the App. If the sensor still detects a water leak after 10 minutes,
the detector will trigger the alarm again and another signal will be sent to the gateway and the user.
The alarm will be canceled if the situation as below.
①
Water leak is controlled/stopped
②
User presses the mute status by using the app
③
The button on the sensor itself is pressed
④
Power is turned off
Details about the alarm:
there are four settings to select from in App.
⑤
0: Buzzer muted, LED off
⑥
1: Buzzer muted, LED flashes
⑦
2: Buzzer on, LED off
⑧
3: Buzzer on, LED flashes (Default setting)
6. When the battery voltage low, the detector will send a low battery signal to the gateway.
8. Notes
1.
Replace the battery immediately when the low battery warning sounds to ensure the detector is
working properly.
2.
Do not store any items on the surface of detector, as this may affect the sensors.
3.
Clean the surface with soft towel regularly.
4.
In the unlikelihood of a product failure, do not attempt to repair. Please contact the local
distributor.
