4
5.
Installation Position and Notes
1.
The sensor should be used indoors and away from sources of moisture.
2.
The magnet and the main sensor must be less than 2cm apart. Main sensor must be affixed to the
door or window and the magnet must be affixed to the frame. The magnet and the main sensor
must separate when the door or window is opened.
3.
The sensor should not be mounted on a metal frame.
6.
Product Installation
This product can be mounted by screws or 3M adhesive tape. Install it according to the diagram below:
①
Push the bracket upwards to separate it from the body, then fix the bracket on the door/window by
screw or 3M tape.
②
Take off the bracket on the back, install battery into the body. The LED will slowly flash 3 times.
③
Be careful when installing the bracket back onto the body. The best approach is from the side.
④
Stick the magnet onto the moving part of the door/window, no further than 20mm from the sensor.
