Jan 2012
T190 Iss.2
Page 5 of 38
1.4.
General safety instructions
This incubator is intended for use by suitably qualified laboratory personnel who are familiar with all
precautions and standard safety practices for working in a laboratory environment.
These safety instructions are intended to be used alongside any local safety guidelines, rules and
regulations. If in doubt please consult the Health and Safety Officer of your organisation.
Only skilled electricians or engineers authorised by LEEC can perform repairs or maintenance on this
incubator. Only original spare parts from LEEC can be used. There are no user serviceable parts within
the incubator.
LEEC takes no responsibility for 3
rd
party accessories or equipment used with this incubator.
DANGER
Electrical hazard
Danger of death
Do not remove any panels from incubator.
Do not allow the incubator to become wet.
HOT
SURFACES
Danger of burning
Risk of injury
The glass door and inner chamber reach 200°C during sterilisation.
Do not force the door open during sterilisation.
STABILITY
HAZARD
Stability hazard
Risk of injury
Damage to unit
Do not place the unit too close to the edge of a bench.
Do not lean on the door when open.
LIFTING
HAZARD
Lifting hazard
Risk of injury
Damage to unit
Lift with 4 people
95kg
Observe safe handling regulations