FCC ID : 2AFIW-XE300C4 – Contains FCC ID: XMR201808EC25AF
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
3. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help important announcement.
Radiation Exposure Statement
This device meets the government’s requirements for exposure to radio waves. The guidelines are based on
standards that were developed by independent scientific organizations through periodic and thorough evaluation
of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons
regardless of age or health.
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: GL-XE300C4 and GL-XE300C6
have also been tested against this SAR limit.
The Equipment named above is confirmed to comply with the requirements setout in the European Council
Directive on the Approximation of the Laws of the Member States relating to RED (2014/53/EU). The equipment
passed the test which was perfomed according to the following European standards:
EN 301 489-1 V2.2.3 : EN 301 489-17 V3.2.2; EN 301 489-52 V1.1.0 EN 300 328 V2.2.2; EN 301 511 V12.5.1;
EN 301 908-1 V11.1.1; EN 301 908-2 V11.1.2; EN 301 908-13 V11.1.2; EN50566:2017& EN62209-2:2010; EN62368-
1:2014+A11:2017
This product uses WiFi 2.4GHz Operating Frequency is 2400~2483.5MHz;
The Product comply with Directive 2011/65/EU and its amendment directive 2015/863/EU (Rohs2.0)
No. of ports
2
IP rating
IP65
Connectivity
Ethernet | Wi-Fi
Power rating
7.5 W MAX
Passive PoE IN
24V MAX
Temperature range
-15°C / 40°C | 5°F / 104°F
Storage temperature range
-20°C / 60°C | -4°F / 140°F
Warranty
12 months
TECHNICAL SPECIFICATIONS
Содержание Twinkly Pro
Страница 23: ...4G Modem setup ...
