background image

www.prolight.co.uk

Rapid QB1 RGBA IP

  

User Manual

3

IP rating information

IP Rating:

The IP (International Protection) rating classifies and rates the degree of protection  
provided against intrusion of foreign objects such as dust and water into housings  
and electrical enclosures. 
The rating consists of the letters IP followed by two digits (i.e. IP54) where the numbers 
define the level of protection. The first digit (solids) stands for the level of protection the 
enclosure provides against solid bodies, whilst the second digit (liquids) stands for the 
degree of protection of the equipment inside the enclosure against water.  
An IP54 rated fixture is one which has been designed and tested to protect from limited 
dust ingress (5) and water spray from any direction (4).

Marine/Coastal Installations:

Although this fixture has an IP rating it is NOT suitable for installation in a coastal/ 
marine environment. Installing this fixture in a coastal/marine environment could cause 
corrosion and excessive wear to the internal and/or external components. Any damages, 
faults or performance issues resulting from the installation in one of the environments 
listed above will void the manufacturers warranty and will NOT be subject to any  
warranty claims, parts or repairs.

Please ENSURE all connections are sealed with the rubber caps if provided and the  
correct cables are used and connected correctly to prevent dust and/or water ingress, 
condensation and/or corrosion.

IMPORTANT INFORMATION!

If this fixture is installed in extreme outdoor and/or wet conditions, it MUST be powered 
ON and operated for a minimum of 30 minutes every 1-2 weeks. Excessive usage in 
extreme outdoor and/or wet conditions without a consistent usage cycle as described 
above can lead to component damage and/or a reduced fixture lifetime. Any damage to 
the fixture found to be a direct result of not following the above guidelines will void the  
manufacturers warranty and will NOT be subject to any warranty claims, parts or repairs.

PLEASE READ THE BELOW CAREFULLY BEFORE USING   
THE FIXTURE IN OUTDOOR/EXTREME ENVIRONMENTS

IP54

RATED

!

Содержание Rapid QB1

















Отзывы: