www.prolight.co.uk
Rapid QB1 RGBA IP
User Manual
10
Operating instructions
Master/slave operation:
To set the master unit, press the
“MENU”
button to show
“Wireless DMX”
on the OLED display.
Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select
“Transmit”
.
Press the
“ENTER”
button to confirm the setting. Then select your desired program.
To set the other units in slave mode, press the
“MENU”
button to show
“Wireless DMX”
on the OLED
display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select
“Receive”
.
Press the
“ENTER”
button to confirm the setting. The unit will now run in sequence with the master unit.
To exit out of any of the above options, press the
“MENU”
button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Wireless master/slave operation:
Firstly clear the fixtures wireless DMX memory by following the instructions
Clear wireless DMX memory
.
To set the units into master/slave follow the instructions above
(Master/slave operation)
.
To pair the master unit with the slave(s), press the
“MENU”
button to show
“Wireless DMX”
on the OLED
display. Now use the
“UP”
and
“DOWN”
buttons to select
“Pair”
. Press the
“ENTER”
button to pair.
The wireless DMX indicator will start flashing fast. Once the pair is successful the indicator will turn
solid yellow.
Software version:
To display the software version, press the
“MENU”
button to show
“Information” o
n the OLED display.
Now use the
“UP”
and
“DOWN”
buttons to select
“Version”
. Press the
“ENTER”
button and the software
version will be displayed. To exit out of any of the above options, press the
“MENU”
button.
Current fixture run time:
To display the current fixture run time, press the
“MENU”
button to show
“Information” o
n the
OLED display. Now use the
“UP”
and
“DOWN”
buttons to select
“Current Time”
.
Press the
“ENTER”
button and the current fixture run time will be displayed.
To exit out of any of the above options, press the
“MENU”
button.
Total fixture run time:
To display the total fixture run time, press the
“MENU”
button to show
“Information” o
n the
OLED display. Now use the
“UP”
and
“DOWN”
buttons to select
“Total Time”
.
Press the
“ENTER”
button and the total fixture run time will be displayed.
To exit out of any of the above options, press the
“MENU”
button.
Fixture temperature:
To display the fixture temperature, press the
“MENU”
button to show
“Information” o
n the OLED display.
Now use the
“UP”
and
“DOWN”
buttons to select
“Temperature”
. Press the
“ENTER”
button and the
software version will be displayed. To exit out of any of the above options, press the
“MENU”
button.
