www.prolight.co.uk
Performer 200 Quad
User Manual
6
Operating instructions
Static colour mode:
To access the static colour mode press
“MENU”
until
stat
shows on the LED display.
Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select the brightness between
r.000
~
r.255
. Press the
“ENTER”
button and repeat for green (
G
), blue (
b
) and white (
u
).
Value: 000 - 255 (000 = low brightness, 255 = high brightness)
To exit out of any of the above options, press the
“MENU”
button.
Colour change mode:
To access colour change mode press
“MENU”
until the display shows
CC--
on the LED display.
Press
“ENTER”
to confirm the setting. Use the
“UP”
and
“DOWN”
buttons to ajust the speed between
CC00
~
CC99
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Colour fade mode:
To access colour fade mode press
“MENU”
until the display shows
CP--
on the LED display.
Press
“ENTER”
to confirm the setting. Use the
“UP”
and
“DOWN”
buttons to ajust the speed
between
CP00
~
CP99
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Auto mode:
To access auto mode press
“MENU”
until the display shows
dE--
on the LED display.
Press
“ENTER”
to confirm the setting. Use the
“UP”
and
“DOWN”
buttons to ajust the speed
between
dE00
~
dE99
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Master/slave mode:
To set the master unit, press the
“MENU”
button on the rear of the master unit to select your
desired program (sound active, auto, static colour or colour fade).
To set the other units in slave mode, press the
“MENU”
button on the rear of the unit to show
d001
on the LED display and press the
“ENTER”
button to confirm the setting. The units will now run in
sequence with the master unit. To exit out of any of the above options, press the
“MENU”
button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Sound active mode:
To access the sound active mode, press the
“MENU”
button on the rear of the unit to show
bEbE
on the LED display. The unit will now respond to sound.
To exit out of any of the above options, press the
“MENU”
button.
