www.prolight.co.uk
Colour Blast 80
User Manual
13
01 - Sets the unit into blackout off/on (LED on/off)
02 - Activates the static colours/auto modes, use the ‘PROG’
button to cycle through static colour and auto modes.
Static colour - use the ‘+’ and ‘–’ buttons to select the
required colour. Use the ‘F’ button followed by the ‘+’ and
‘–’ buttons to set the flash speed
Auto modes - use the ‘SP’ button followed by the ‘+’ and
‘–’ buttons to adjust the selected auto program speed
03 - Activates the strobe, use the ‘+’ and ‘–’ buttons
to adjust the strobe speed
04 - Activates the auto mode/sound mode speed.
Press this button followed by the ‘+’ and ‘–’ buttons to
adjust the program speed
05 - Activates the DMX mode. Press once and use the ‘+’
and ‘–’ buttons to adjust the DMX address. Press again ‘+’
and ‘–’ buttons to adjust the DMX channel mode. Press
again ‘+’ and ‘–’ buttons to adjust the dimmer curve mode.
06 - Sets the DMX address, press once followed by three
numeric buttons to set the DMX address required
07 - Activates the slave/sound modes. Press once to activate
sound mode followed by the ‘+’ and ‘–’ buttons to adjust
the sound mode. Press the ‘SP’ button followed by the ‘+’
and ‘–’ buttons to adjust the sound sensitivity. Press again
to activate slave mode.
08 - Activates the manual dimming mode, select one of the
colours below and use the ‘+’ and ‘–’ buttons to select
the brightness between 000-255. Repeat for all 3 other
colours.
09 - Adjusts the static colour, strobe speed, auto program
speed, sound mode, sound sensitivity, DMX address,
DMX channel mode, dimming curve and manual dimming
modes
10 - Sets the DMX address
Operating instructions
BLACK OUT
SELECT PROG
FLASH
PROG
F
SET ADDR
S
DMX MODE
D
SPEED
SP
SLAVE/SA
SL
SA
W
R
G
B
A
0
3
1
2
4
5
6
8
9
+
7
DIMMING
08
01
02
04
07
09
05
10
03
06
09
A
B
C
E
IR remote functions:
A - Red
B - Green
C - Blue
D - Amber
